GEO SPREADER SYSTEMS - (SOLID FERTILIZERS)

Geo spreader
GEO SPREADER SYSTEMS - (SOLID FERTILIZERS)
In FieldIn Field
Slurry TankerSlurry Tanker
Manure SpreaderManure Spreader
Sistema per il monitoraggio ed il controllo dello distribuzione di letame e fertilizzante.
Disponibile in due versioni, il sistema BASIC visualizza e memorizza in tempo reale il valore di distribuzione; la versione SUPERIOR regola la macchina (es. velocità del nastro di scarico) 
Richiedo offerta Desidero saperne di più
  • Distribuzione omogenea, in linea con il valore programmato dall’utente. Questo permette il rispetto delle norme sullo spandimento
  • Distribuire in modo omogeneo permette di ottenere maggior resa e produttività del terreno e incrementare i profitti
  • Il sistema di monitoraggio e regolazione della distribuzione rende il lavoro più semplice, veloce ed efficace
  BASIC Version SUPERIOR Version
Real time visualization of spread factor YES YES
Hydraulic control of the machine NO YES
Manual / Automatic machine regulation (e.g. regulation of belt speed) NO YES
Measuring of machine ground speed with GPS antenna YES YES

Compatibility with Field Trace Software for: Data Acquisition, Printing reports, Cost traceability

YES YES
Load cell connection (optional) YES YES
Connection of GPS antenna to monitor the treatment in accordance with the programmed spread factor. NO YES

For installations on trailed fertilizers with belt, the GeoSpreader system have to be connected to the NPN impulse counting sensor installed directly on gearbox of the hydraulic motor that drives the belt. The sensor’s resolution should have not less than 600 impulses per shaft revolution. This sensor is supplied and installed from the manufacturer of the hydraulic motor.
 

Basic Version

GeoSpreader system (BASIC VERSION) monitors the amount of material distributed in a specific area (t/ha o t/ac.)
If the system is equipped with load cells, the spread factor is calculated through real-time acquisition of the remaining weight inside the machine.
If the system is NOT equipped with load cells, the spread factor is calculated on the amount of beater turns or on belt speed.
 
The indicator displays:
  • Programmed spread factor
  • Real-time spread factor  
  • Weight of material inside the machine
  • Ground speed of the machine
  • Beater rotation speed
  • Belt speed
                                                                                  
P1:  sensor for measuring beater rotation speed
P2:  connection to impulse sensor installed on the hydraulic motor that drives the belt. This sensor is not included into the GeoSpreader kit. The NPN-type sensor should have not less than 600 impulses per shaft revolution.
 
GeoSpreader BASIC Kit
Code Description Quantity
999-0711 Indicator GeoSpreader BASIC 1
- Mounting support 1
979-0266 GPS Antenna for measuring ground speed 1
989-0463 Connection cable( Indicator- sensors) 1

959-0333

Sensor for measuring beater rotation speed 1

SUPERIOR VERSION

GeoSpreader system (SUPERIOR VERSION) same features of the BASIC Version plus:
- MANUAL/AUTOMATIC control of the belt speed or beaters.
 
If the system is equipped with load cells, the spread factor is calculated through real-time acquisition of the remaining weight inside the machine.
If the system is NOT equipped with load cells, the spread factor is calculated on the amount of beater turns or on belt speed.
The speed of the belt can be set MANUALLY by the operator (driver) or AUTOMATICALLY from the system to reach the programmed spread factor.
 
The SUPERIOR version is equipped with switches for activating the following hydraulic functions:
  • Open / close the gate
  • Moving forward / backwards the belt of the machine
  • Increasing / decreasing the belt speed
Switches on the indicator allow quick and effective control of the hydraulic functions of the machine. Up to 7 hydraulic double-way functions are available on request.
 
The indicator displays following information:
  • Programmed spread factor
  • Real-time spread factor  
  • Weight of material inside the machine
  • Ground speed of the machine
  • Beater rotation speed
  • Belt speed
P1:  sensor that measure beater rotation speed
P2:  connection of impulse sensor installed on the hydraulic motor that drives the belt. This sensor is not included into GeoSpreader kit. The NPN-type sensor should have not less than 600 impulses per shaft revolution.
EVP: output of proportional valve control. The output voltage can be set from 0 to 10 Vdc. For actuating the proportional valve from 0 to 2,5 Adc the Proportional BOX (code 979-0115, not included in the kit) is available.
 

GeoSpreader SUPERIOR Kit

Code Description Quantity
999-0713 GeoSpreader Indicator SUPERIOR Version 1
- Mounting support 1
979-0266 GPS Antenna to measure ground speed 1
989-0265 Connection cable (Indicator – Driver box) 1
979-0284 Driver BOX for connecting sensors and activate hydraulic functions 1
959-0333 Sensor for measuring beater rotation speed 1
- Cable for connecting belt speed sensor 1
989-0262 Cable for connecting proportional valve 1
989-0263 Cable for connecting double-way hydraulic management 2

 

Accessories for GeoSpreader SUPERIOR:

Code Description Quantity
979-0255 GPRS modem to transfer data to Field Trace from GeoSpreader 1
979-0099 USB key to update the firmware and transfer data from GeoSpreader to Field Trace 1
979-0115 Proportional Box to drive the proportional output 1
979-0301 Rotating potentiometer to measure the opening level of the gate 1
979-0289 GPS-antenna to monitor the correct treatment in accordance with programmed spread factor from Field Trace Software 1

Operating Algorithms


Machine Type

Load cells (option)
Operating algorithms
Real time weight Weight per beater turn Belt speed
MANURE SPREADER
(with belt conveyor)
YES YES NO NO
NO NO NO YES
FERTILIZER SPREADER
(with belt conveyor)
YES YES NO NO
NO NO NO YES
FERTILIZER SPREADER
(without belt conveyor)
YES YES NO NO
NO NO YES YES

 

Caratteristiche Prodotto

Dimensioni del Display: 123 x 30.4 mm
 
Display Type: Backlighted Display
Display Aspect Ratio: 16:9 format 800x480
 
Protezione: IP 67
Driver Box (superior version): IP 67
 
Power supply: 9.5 – 32 Vdc
Weight: 1,1 kg (2.2 lbs)
Driver Box (superior version): 1 kg (2.4 lbs)
 
Working Temperature: -20 / +65°C (-4 /+150°F)
Driver Box (superior version): -20 / +65°C (-4 /+150°F)
Case Dimensions: 192 x 163 x 55 mm (7.6 x 6.4 x 2.2 inches)
Driver Box (superior version): 210 x 130 x 45 mm (8.3 x 5.1 x 1.8 inches)
Material: Polyamide (PA) 30% glass fiber, noise shielded

Download Technical Sheet

Condividi facebook share twitter share google+ share pinterest share
Siglacom - Internet Partner