GEO SPREADER SYSTEMS - (LIQUID FERTILIZERS)

Geo spreader
GEO SPREADER SYSTEMS - (LIQUID FERTILIZERS)
In FieldIn Field
Slurry TankerSlurry Tanker
Manure SpreaderManure Spreader
The GeoSpreader System is designed to control the distribution of liquid fertilizers and slurry. Richiedo offerta Desidero saperne di più
  • Keep fertilizer distribution homogeneous in accordance with planned spread factor
  • Fulfil local spreading regulations
  • Homogeneous distribution turns into:
    • higher yields and land productivity
    • increase profits
  • Quick and high distribution efficiency   
The system is available in two versions:
  • the BASIC system displays and records distribution data in real time,
  • the SUPERIOR version is capable of  regulating machine functions like opening of slide gate vales to ensure effective material spreading in accordance with:
                         - Planned spread factor
                         - Homogeneity of material distributed in relation with ground speed of the machine


 

  BASIC Version SUPERIOR Version
Real time visualization of spread factor YES YES
Hydraulic control of the machine NO YES
Manual / Automatic machine regulation (e.g. regulation of belt speed) NO YES
Measuring of machine ground speed with GPS antenna YES YES

Compatibility with Field Trace Software for: Data Acquisition, Printing reports, Cost traceability

YES YES
Load cell connection (optional) YES YES
Connection of GPS antenna to monitor the treatment in accordance with the programmed spread factor. NO YES

Basic Version

GeoSpreader system (BASIC VERSION) monitors the amount of material distributed in a specific area (t/ha o t/ac.)
If the system is equipped with load cells, the amount of liquid left in the tank is calculated through real-time acquisition of the remaining liquid inside the tank.
 
The spread factor is calculated in real-time based on number of impulses registered by the flow meter (litres).
 
The indicator displays:
  • Programmed spread factor
  • Real-time spread factor  
  • Amount of liquid inside the tank
  • Ground speed of the machine
               
P2:  connection to flowmeter installed in the discharging spout. This sensor is not included into the GeoSpreader kit. The NPN-type sensor should have not less than 1 impulse per liter  

 

GeoSpreader BASIC Kit

Code Description Quantity
999-0711 Indicator Geospreader Basic 1
- Mounting support 1
979-0266 GPS Antenna for measuring ground speed 1
989-0463 Connection cable( Indicator- sensors) 1

SUPERIOR VERSION

GeoSpreader system (SUPERIOR VERSION) monitors the amount of material distributed in a specific area (t/ha o t/ac.)
If the system is equipped with load cells, the amount of liquid left in the tank is calculated through real-time acquisition of the remaining liquid.
 
The spread factor is calculated in real-time based on a number of impulses registered by the flow meter (liters).
The opening and closing of the slide gate valve can be actuated MANUALLY by the operator (driver) or AUTOMATICALLY from the system to reach the programmed spread factor.
 
 
The SUPERIOR version is equipped with switches for activating the following hydraulic functions:
  • Open / close the slide valves
  • Open / close the left discharging line
  • Open / close the right discharging line
Switches on the indicator allow quick and effective control of the hydraulic functions of the machine. Up to 7 hydraulic double-way functions are available on request.
 
The indicator displays following information:
  • Programmed spread factor
  • Real-time spread factor  
  • Amount of liquid inside the tank
  • Ground speed of the machine
 
P1:  sensor that measures the opening of the discharge line (Not included within the kit)
P2:  connection to flowmeter installed in the discharging spout. This sensor is not included into the GeoSpreader kit. The NPN-type sensor should have not less than 1 impulse per liter  
 

GeoSpreader SUPERIOR Kit

Code Description Quantity
999-0713 GeoSpreader Indicator SUPERIOR Version 1
- Mounting support 1
979-0266 GPS Antenna to measure ground speed 1
989-0265 Connection cable (Indicator – Driver box) 1
979-0284 Driver BOX for connecting sensors and activate hydraulic functions 1
- Cable for connecting flow meter 1
989-0263 Cable for connecting double-way hydraulic management


Accessories for GeoSpreader SUPERIOR:

Code Description Quantity
979-0255 GPRS modem to transfer data to Field Trace from GeoSpreader 1
979-0099 USB key to update the firmware and transfer data from GeoSpreader to Field Trace 1
979-0301 Rotating potentiometer to measure the opening level of the gate 1
979-0289 GPS-antenna to monitor the correct treatment in accordance with programmed spread factor from Field Trace Software 1

Caratteristiche Prodotto

Dimensioni del Display: 123 x 30.4 mm
 
Display Type: Backlighted Display 
Display Aspect Ratio: 16:9 format 800x480

 
Protezione: IP 67
Driver Box (superior version): IP 67 
 
Power supply: 9.5 – 32 Vdc
Weight: 1,1 kg (2.2 lbs)
Driver Box (superior version): 1 kg (2.4 lbs)
Working Temperature: -20 / +65°C  (-4 /+150°F)
Driver Box (superior version): -20 / +65°C (-4 /+150°F)
Case Dimensions: 192 x 163 x 55 mm  (7.6 x 6.4 x 2.2 inches)
Driver Box (superior version): 210 x 130 x 45 mm  (8.3 x 5.1 x 1.8 inches)
Material: Polyamide (PA) 30% glass fiber, noise shielded
Driver Box (superior version): Polyamide (PA) 30% glass fiber, noise shielded

Download Technical Sheet

Condividi facebook share twitter share google+ share pinterest share
Siglacom - Internet Partner