Faq

Tipologia FAQ

n. 14

n. 14

Which languages does the DTM (TM) support?

The DTM^TM is a multi language software so it provides you the possibility to work with several languages.

Is it possible to create customizable report on demand?

The DTM^TM gives you the possibility to have the report about the recipes and the loading program or about the execution of the recipes or unloading program you executed on the Scale mounted on the Feed Mixer.

How are the manual weighing managed?

The Scale, which is installed on the Feed mixer, gives you the possibility to save on the memory card (if it is connected) the actual weight of the feed, actually present on the feed mixer.

How are ingredient and cost managed?

The DTM^TM gives you the possibility to define the costs for each ingriedent, so when you create a recipe you will know the total cost related to each ingriedent and the total cost for the recipe.

Is it possible to associate one group to one recipe?

The DTM^TM gives you the possibility to insert all the groups of your animals and you can link one group to one or more than one recipe.

How to manage the loading program?

The DTM^TM gives you the possibility to define two kinds of recipes:

How to manage the unloading program?

The DTM^TM gives you the possibility to define the unloading program, so after loading the feed on feed mixer, you can decide how to discharge the feed.

Is it possible to store the load and unload "Execution"?

The DTM^TM gives you to show all the executions stored by the dinamica generale Weighing System; as a matter of fact you can transfer the recipes and the unloading program into a memory card.

Is it possible to get the execution data from the Scale?

If the memory card is connected to the Scale, the weight box saves a lot of details as the effective loaded quantity for each component.

How can I track the costs?

Consulting the details of your executions, you can see that the DTM^TM shows you the details about the Programmed costs and the Effective costs.

Does the DTM (TM) notices the operator error?

The operation of loading and unloading are executed by an operator that drives the feed mixer.

Is it possible to register the operator and track the driving?

In this case you can define an account related to each operator, that will be transferred on the memory card.

Wich are the steps to be carried out if the DTM (TM) does not recognize the card?

You must check if the COM port is correct in the hardware management and you must plug and unplug the card.

Is it possible to print the information coming from the indicator of my feed-mixer on DG printer? Is it necessary some other device (adapter, ...) in order to obtain this?

There are two possible ways for printing the information and data during or after the weighing sessions:

n. 14

n. 14

Tag: DTM (TM) SW