DG-PIN

Load Cells & Sensors
DG-PIN
On-FarmOn-Farm
LivestockLivestock
BiogasBiogas
In FieldIn Field
BalerBaler
Versatile weighing units with differnet capacities (9 t – 13,6 t – 18 t – 27 t). Compatible with all weight indicators. get a quote
This weighing unit, has been designed to ease the installation of weighing and dosing systems, in tanks, bins and hoppers.
Conceived with a mechanical structure realized in high resistance steel and with a rust preventing and antioxidant surface treatment.
A DG-PIN load cell executed in high resistance stainless steel with IP68 protection class can be paired to each unit.
The weighing unit is equipped with load self alignment to ensure high metrological performances even in case of adjustments, thermal dilation, positioning errors, lateral forces and deformation of structures.
To ensure the stability of the structure the designer must consider further contrivances according to the following conditions: Wind effect – knocks and vibrations – seismic conditions – hardness of support structure.

Dinamica Generale is not responsible in case of incident, damage or misuse of the weighing unit.

Part Number

Model / Code
9 ton / 969-0130
13.6 ton / 969-0226
18 ton / 969-0227
27 ton / 969-0128

 

Size

Installation examples





Square system with 4
supporting points




Circular system with 3
supporting points.

Assembly instructions

1) Fix the lower plate of unit to the floor using bolts or Fischer.
2) Fix the weighing system to upper plate of the unit using bolts.
3) Connect the weighing units in use to electrical earth, in accordance with all plant design regulations in force.
4) Take care to avoid accidental overloads of the load cells while assembling the unit.
5) Be sure that current does not pass through the load cell (while welding, connect the ground clamp to the top of the weighing unit).



The company reserves the right to make any change without notice, in order to improve the technical performances of the product.

Product Features

Cable length: 9000 mm
Ingress Protection: IP67
Capacity:
Load: 9 - 13.6 - 18 - 27 ton
Material:
Load cell: Stainless steel
Weighing unit: Alloy steel
Output:
Rated: 3,00 ± 1% mV/V
Error:
Combined: ± 0.02 % F.S.
Repeatability: ± 0.02 % F.S.
Creep: ± 0.02 % F.S. / 30min.
Temperature Effect:
On output: ± 0,011 % F.S. /10°C
On zero: ± 0,019 % F.S. /10°C
 
Impedance:
Input: 700 Ohm ± 10
Output: 703 Ohm ± 4
Insulation: ≥5000 MΩ  / 50VDC (min)
Excitation:
Recommended: 5-12 VDC
Maximum: 18Vdc
Temperature Range:
Compensated: -10°C / +40 °C
Operating: -35°C / +65 °C
 
Overload:
Safe: 120 % F.S.
Ultimate: 150 % F.S.
Cable type: shielded 4 wire cable
Termination: Wires

Download Technical Sheet

Siglacom - Internet Partner